Timothy Thompson

Senior Principal

Tim is a Registered Professional Engineer of Queensland with over 21 years of geotechnical investigation and design experience including deep and shallow bridge foundations, retaining walls, detention basins, rockfall protection, and slope risk assessment and stabilisation. Tim completed Bachelors and Masters degrees at Purdue University and has experience in the U.S., the U.K. and Australia. Tim spent more than 18 years at Arup before joining EDG in early 2024.

Tim is currently the National Chair of the Australian Geomechanics Society (AGS) and served as the Queensland Chair in 2016 and 2017. Tim led the development and implementation of the Queensland Geotechnical with an AGS colleague, and is currently undertaking part-time research at the University of Queensland.

Tim’s areas of expertise include:

Timothy Thompson Publications

  • Thompson, T., Priddle, J., Karlovsek, J. (2024).  The Queensland Geotechnical Database.  Australian Geomechanics, Volume 59, No. 1.
  • Wade, P., Thorin, S., Swavley, T., Durham, S., Thompson, T. (2023). Development of AGS 4.1.1 AU format for ground data transfer in Australia. Proceedings of the 14th Australia New Zealand Conference on Geomechanics, Cairns, QLD.
  • Thompson, T. (2022). The Influence of wildfires on soil and rock slope risk.  Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering, Sydney, NSW. 
  • Thompson, T. (2019). The Legacy of geotechnical information on the Brisbane Airport Link and Northern Busway Project. Proceedings of the 13th Australia New Zealand Conference on Geomechanics, Perth, WA.
  • Thompson, T. (2018). Introduction to the Australian Geomechanics Special Issue on Digital Geotechnics. Australian Geomechanics, Volume 53, No. 3.  
  • Thompson, T. (2016). A 2016 Case for public geotechnical databases.  Proceedings of the 5th International Conference on Geotechnical and Geophysical Site Characterisation, Gold Coast, QLD.
  • So, M.M.L., Thompson, T., Mote, T. (2015), Sitespecific response analysis in Australia and comparison with AS1170.4 and Geoscience Australia 2012 Seismic Hazard Maps.  Proceedings of the 6th International Conference on Earthquake Geotechnical Engineering, Christchurch, NZ
  • Thompson, T., Terzaghi, S., Lee, C. (2014). A Methodology for the design of driven piles through municipal solid waste material.  Proceedings of the 7th International Congress on Environmental Geotechnics, Melbourne, Victoria.
  • Thompson, T. (2012). Guidance for the CPT-based assessment of earthquake-induced liquefaction potential in Australia using AS1170.4, with a focus on the Queensland coast. Australian Earthquake Engineering Society 2012 Conference.
  • Bragard, C., Francis, O., Thompson, T. (2012). A better understanding of the potential effect of underground construction induced ground movement and its implementation in practice.  Proceedings of the 11th Australia New Zealand Conference on Geomechanics, Melbourne, Victoria.